April 22, 2025
The Martin-Till Weight Transfer System is an essential tool for ensuring proper weight distribution across planters, enhancing performance and reducing wear on equipment. This guide will walk you through the step-by-step installation process and provide tips for optimal usage.
Step-by-Step Installation Guide
- Prepare the Equipment:
- Begin by parking your planter on a level surface and ensuring all necessary tools are on hand, including wrenches, bolts, and the installation manual provided by Martin-Till. If you’ve misplaced your manual, give us a call (1-855-612-7006) and we’ll make sure you get a new one.
- Disconnect any power sources to the planter to ensure safety during installation.
- Install Mounting Brackets:
- Secure the provided mounting brackets onto the frame of the planter, following the specific instructions for your model.
- Use the supplied hardware to fasten the brackets tightly, ensuring they are level and secure.
- Attach the Weight Transfer Components:
- Connect the weight transfer arms to the mounting brackets using the appropriate pins and bolts.
- Adjust the arms to the recommended settings based on your planter’s size and field conditions.
- Integrate Hydraulic Components:
- Attach the hydraulic lines to the weight transfer system, ensuring all connections are tight and free from leaks.
- Route the hydraulic lines carefully to prevent damage during operation.
- Test the System:
- Reconnect power sources and activate the hydraulic system to test its functionality.
- Make any necessary adjustments to ensure the system is operating smoothly and evenly distributing weight across the planter.
Tips for Optimal Usage
- Regular Maintenance:
- Check the system periodically for wear and tear, ensuring all components remain in good working condition.
- Field-Specific Adjustments:
- Fine-tune the weight transfer settings based on the specific conditions of your fields, such as soil type and residue levels.
- Follow Manufacturer Guidelines:
- Always refer to the Martin-Till manual for specific recommendations and troubleshooting tips.
Why Install the Martin-Till Weight Transfer System?
By maintaining even weight distribution, the Martin-Till Weight Transfer System helps reduce planter wear, improve seed placement accuracy, and optimize planting performance. Whether you’re operating in no-till, minimum-till, or conventional systems, this tool is an invaluable addition to your planting setup. Give us a call at 1-855-612-7006 if you’ve got any additional questions on setting up your Weight Transfer System.